Current Category : The Sidewinder - Go to Category Index | Search.

From this page you can securely order parts for the Sidewinder. You may click here for comprehensive information on the Sidewinder or click here to go to the plans ordering page.

Instructions: Scroll down the list of parts and find the item or items that you want. For each part enter the quantity that you want and click on the "buy" button displayed for that item. You will then be taken to your current purchase list, and that item should have been added. If you need to order more click back button on your browser and and do the same for each item. However, if at this stage that is all you want to buy click on 'check out'. You will then be asked to fill out your information on a secure server.

All Prices are in Australian Dollars. ( USA residents will only pay approx 75% of list prices quoted due to exchange rates. ) Note: Our Australian dollar is only worth around 75 cents to the US dollar, that means USA residents will only pay around half the price shown here in Australian dollars.

Your Computer: If this page is not working as you think it should please make sure your internet browser has javascript enabled. Our javascript is harmless and enabling javascript can be done for just the time you are at our site if you wish. But generally it is enabled by default. If your not sure how to enbable it please try (in Internet Explorer) going to Tools > Options then the Security Tab where you can set it back to 'Default' or enabling 'Active Scripting'.

	SW01		QTY:
	Chassis, fully welded & drilled with rollbars & all brackets welded on new "Sidewinder Plus" narrow nose shape

	SWPACK		QTY:
	Chassis Frame pack, pre-cut & drilled, pre-bent rollbars & all mount brackets, just needs welding. (not required if ordering SW01)

	ROLL2		QTY:
	Rollbars, front & rear, (not required if ordering chassis)

	SW35		QTY:
	Laser cut bracket kit for chassis only. 27 parts. Includes front & rear shock mounts, column mounts, harness mounts, front & rear arm mounts, pivot pin retainers. Not required if ordering SWPACK or SW01.

	SW07-DUP1		QTY:
	Front Swing Axle Suspension Arms, right & left. Fully welded & drilled

	SWO8		QTY:
	Front Swing Axle Pivot Bushes, Acetal (4)

	SW09		QTY:
	Front Swing Axle Pivot Pins with nuts & washers (2)

	STUB032		QTY:
	Front Stub axles, left & right, welded & drilled with uprights & steering arms, calliper mounts (2). Suit calipers CAL032x2 & wheel hubs FWH-04

	BSH12-4-DUP6		QTY:
	Front Stub Axle Bushes, Acetal (4)

	STB12-2-DUP5		QTY:
	Front Stub Axle Bolts, 12mm. Includes, washers & nyloc nuts

	STUB-01-DUP1		QTY:
	Machined plain stub axle to suit FWH-01 (front wheel hubs) comes with nuts, washer and split pins. (Not required if ordering STUB032)

	FWH-04-DUP3		QTY:
	Front Wheel hubs with disc rotor mount, alloy, 4 Stud 156mm PCD, includes studs, nuts, bearings & seals, dust caps. Suits Taipan, Sidewinder, Piranha & Barracuda

	SW02		QTY:
	Rear Suspension Swing Arm, fully welded & drilled. Multi braced design. (Includes PF206 Bearing Flanges)

	SW03		QTY:
	Rear Suspension Swing Arm Pivot Bushes, Acetal (2)

	SW05		QTY:
	Rear Suspension Swing Arm Pivot Pin with nuts & washers

	UC206-DUP2		QTY:
	Rear Axle Bearings 1 ¼" (2)

	PF206		QTY:
	Rear Axle Bearing Flanges to suit bearings (Not required if ordering SW02)

	AXL-02		QTY:
	Rear Axle, 1120mm long, 4140 steel with keyways & wheel hubs fitted with studs & nuts.

	RWH-02		QTY:
	Rear wheel hubs only, Machined from solid, 1 1/4” bore, 4 stud 115mm PCD pattern & 4 stud 101.6mm PCD with studs & nuts  (not required if ordering rear axle)

	SW20		QTY:
	All the above parts; chassis, suspension arms, axles, hubs, pivot pins, stubs, bushes, bearings all fully welded (discounted price).

	SW30		QTY:
	Steering Rack Mount, suits escort rack

	SB02		QTY:
	Steering Boss, 3 hole Mount, 22mm centre

	ESCORT BSH		QTY:
	Steering Bush, fits inside cut off side of Ford Escort rack. (steel)

	HYP12		QTY:
	Steering column pivot buses and clamps

	PF58G		QTY:
	Steering tie rod ends 1/2" UNF female with nylon inserts, 1/2" UNF studded shanks

	MSC-01-DUP4		QTY:
	Master Cylinder 5/8" Girling type, fits pedal box or make your own mount

	BB01		QTY:
	Banjo bolt with 2 x crush washers. (2 req'd)

	PSHROD-DUP4		QTY:
	Pushrod & Clevis for Master Cylinder

	HSE-01		QTY:
	Hydraulic Brake Hose, Earls stainless steel braided, 2.1 metres long with Banjo fittings each end

	CAL032-DUP2		QTY:
	Brake Caliper, alloy twin piston for rear brakes, includes bleed screw & Banjo bolt.

	SW032		QTY:
	Rear Caliper mounts between CAL032 caliper & swingarm

	PEDBOX-DUP3		QTY:
	Pedal box housing used to mount pedal and master cylinder

	PEDAL		QTY:
	Pedal, laser cut racing desgin with Acetal pivot bushes. Fits Pedal Box

	PEDBOX-2		QTY:
	Pedal Box complete with Pedal, Pushrod, Clevis, Master Cylinder. NOTE: We run separate Pedal Box for front & rear brakes mounted side by side. Both pedals can be pressed together & by rocking your foot you can control front & rear braking

	PEDBOX-3-DUP3		QTY:
	Pedal Box complete with Pedal, Pedal Stop, Return Spring & Cable Connector. Used for Throttle or Clutch Pedal

	SW23		QTY:
	Throttle Cable 1.5 metres long, can be trimmed to length.

See our Conditions of Sale.

[1] 2 Next Page

Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant